 |
B-Tron Hydroprocessor, 110 volt
This machine maintains maximum control with minimum effort. Modular design with three interchangeable plug-in units which contain all of the electronic components, microcomputers and heating elements for easy, convenient servicing. The B-Tron features automatic liquefaction, (regardless of the starting water temperature), it automatically corrects for absolute temperature control and a special energy-conserving proportionate control system is provided to save energy and prevent overheating.
Separate display panels indicate the temperature of each bath, while function lights indicate Liquefying and Timing modes. An audible tone indicates when materials are liquefied and when they are ready for use in the mouth. There are also special displays to warn of power interruptions and when water levels become too low. The B-Tron is factory programmed with preset temperatures and is ready to use. Temperatures and timers may be easily reprogrammed by operator, if desired, to allow the low-water sensing device to operate in areas with very pure, or distilled water. |
 |
|
 |
B-Tron Hydroprocessor, 110 volt
Dimensions (B-Tron 301)
Width: 16 1/4"
Depth: 10" (plus, allow 1 1/2" for power supply cord)
Height: 10 1/2" (lids closed), 16" (lids open)
Weight: 15 lb
Electrical: 120v 50-60 Hz, 10.4 amps.
Also available in foreign operating voltages (contact factory).
15510 - B-Tron 301, 110v (60 Hz)
(3 bath unit: Boil/Auxiliary Store, Store and Temper)
15520 - B-Tron 201, 110v (60 Hz)
(2 bath unit: Store and Temper)
15521 - B-Tron 201B, 110v (60 Hz)
(2 bath unit: Boil/Store and Temper)
15530 - B-Tron 101, 110v (60 Hz)
(1 bath unit: Boil/Store, or Temper)
18649 - CD-ROM: Technique and cleaning hints |
|
|
|
|
|
|
|
 |
B-Tron Parts List
All the electronics are contained in interchangeable plug-in Electronic Modules which are removable from the top of the unit. NOTE: All B-Tron parts are direct substitutes for Accutron parts. Internal repair of modules is not authorized in the field and will void the warranty. There is no installation labor charge for factory-installed parts.
Parts Direct from Manufacturer
15550 - B-Tron Plug-in Electronic Module (110v)
15590 - B-Tron/Accutron Cosmetic Refurbish Kit
(includes 3 tanks, 3 tank lids, 3 baskets and 3 control panel labels)
15560 - B-Tron Basket w/handle (Boil, Store, Temper)
15570 - B-Tron Water Tank Lid, 3
15575 - B-Tron Water Tank
15572 - Control Panel Label, 3
15583 - B-Tron Fuse, B-Tron 110v (4 amp), pkg. of 3*
15585 - B-Tron Fuse Holder
*This fuse fits all B-Tron models that meet current specifications. (If a fuse other than this type is needed, please contact factory for a free upgrade of base unit.) |
|
|
|
|
|
|
|
|
B-Tron Starter Package
15507 - B-Tron Starter Package
The starter package includes the following:
(12) Tubes of Wash Rev. Hydrocolloid
(24) Tubes of Heavy Bodied Green Rev. Hydrocolloid
(48) Pink CartriLoid Syringe Material
(100) 18 gauge blunt-end CartriLoid Needles
(1) CartriLoid Syringe
(10) Full Arch Water-Cooled Trays
(4 Medium: 2 each of upper and lower)
(1 each of Small, Large, Extra-Large: upper and lower)
(2) Anterior Water-Cooled Trays
(2) Half Arch Water-Cooled Trays
(1) CartriLoid Basket
(1) Tubing for Water-Cooled Trays w/quick disconnects
(1) Potassium Sulfate, 3/4 lb
(1) Box of Tacky Stops
(1) PrepWet, 4 oz
(1) Box of Post Damming Plastic
|
|
 |
|
Order Today!
